CANAM.RIDERS.SPAIN
ES EN
Log in Join

SAFETY RECALLS.

Factory notices that matter

Back to the Workshop

These are safety campaigns from the manufacturer. Each one says which machines it covers and what the workshop does.

This is BRP's official page with all of its safety recalls.

See BRP's official page

A recall does not cover every machine of that model. The brand issues them by manufacturing batch, so within the same model and year some units may be affected and others not, depending on the frame number. Here we tell you which ones may affect you by model and year, which is what BRP publishes. Your official dealer confirms it by checking the frame number. And it costs you nothing: these are factory faults and the brand pays for the repair.

There are 25 safety recalls. Tell us your model and year and we will mark the ones that may affect you.

There is air in the front brake circuit and the pedal sinks almost to the floor when braking Official BRP

Machines affected: 2008 Spyder GS

The risk: The machine may not stop as the rider expects. That increases the risk of an accident.

What the dealer does: The dealer inspects the circuit, bleeds the brakes, changes the brake fluid reservoir caps and checks the system pressure. BRP notified every owner and arranged collection of the machine.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 07V561000 · Date: 12 December 2007 · Part: brake fluid reservoir caps and front hydraulic circuit

The steering takes more force than normal to bring the handlebar off centre Official BRP

Machines affected: Spyder GS from 2008 to 2010. The campaign affects 9,932 machines according to the record

The risk: When correcting a deviation the steering can turn too far and the machine goes where the rider does not want it to. It can leave the lane or leave the road.

What the dealer does: The dealer inspects the machine and changes or repairs whatever parts are needed. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 09V162000 · Date: 19 May 2009 · Part: power steering (DPS)

The ignition key connector can come loose and the machine stops without warning Official BRP

Machines affected: Spyder RT SM5 and SE5 from 2010 built between 13 and 30 October 2009

The risk: The engine can cut out suddenly and without warning, with the risk of an accident that entails.

What the dealer does: The dealer checks that the connector is properly seated and that the key wiring is not too taut, and corrects it if needed. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 09V473000 · Date: 14 December 2009 · Part: ignition key connector and wiring

The SE5 gearbox clutch stays engaged and the engine stalls when coming to a stop Official BRP

Machines affected: Spyder RS SE5 second series and Spyder RT SE5 from 2010

The risk: Once the engine has stalled it may be impossible to start it and the rear wheel can stay locked. The machine then cannot be pushed off the carriageway.

What the dealer does: The dealer repairs the machine. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 10V232000 2010174 · Date: 1 June 2010 · Part: clutch of the SE5 semi automatic gearbox

Reverse can engage when changing down without pressing the button Official BRP

Machines affected: Spyder RT SM5 from 2011

The risk: If it happens while riding, the rear wheel can lock and the engine can stall. If it happens with the machine stopped, it can run backwards on its own. The record warns of a risk of an accident with injuries or deaths.

What the dealer does: The dealer checks that the reverse actuator is working properly and changes it if it is faulty. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 11V081000 2011056 · Date: 7 February 2011 · Part: reverse cable and actuator

The pin in the brake pedal rod can work its way out and fall off Official BRP

Machines affected: Spyder RT from 2010

The risk: The main brake is lost completely and without any prior warning. The record warns of a risk of an accident with injuries or deaths.

What the dealer does: The dealer changes the pins in the brake pedal rod. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 12V159000 2012126 · Date: 11 April 2012 · Part: brake pedal rod pins

The vapour canister vent hose releases fuel inside the engine bay Official BRP

Machines affected: Spyder GS from 2008 and 2009 and Spyder RS from 2010

The risk: Fuel vapour near a heat source can start a fire and cause injury to people.

What the dealer does: The dealer inspects the vapour canister hose and changes it or repositions it if needed. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 12V581000 · Date: 12 December 2012 · Part: vent hose of the fuel vapour canister

The fuel cap does not fit the filler neck properly and does not seal Official BRP

Machines affected: Spyder GS, Spyder RS and Spyder RT from 2008 to 2012

The risk: If the cap does not seal properly it can let fuel vapour escape. Near a heat source that can start a fire and cause injury to people.

What the dealer does: BRP sends every owner a replacement cap. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 12V582000 · Date: 12 December 2012 · Part: fuel tank cap

The master cylinder cover melts and lets the brake fluid out Official BRP

Machines affected: Spyder RT and Spyder ST from 2013

The risk: The brake fluid can drip onto a hot area and start a fire.

What the dealer does: The dealer fits heat shields and a heat deflector. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 13V386000 2013288 · Date: 28 August 2013 · Part: inlet of the tandem master cylinder manifold

The engine bay gets too hot when riding slowly or idling for a long time Official BRP

Machines affected: all 2013 Spyder RT

The risk: A very high temperature in the engine bay can burn the skin or start a fire on the machine.

What the dealer does: The dealer repairs the machine. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 15V095000 2015067 · Date: 19 February 2015 · Part: engine bay and its ventilation

The Coast to Coast passenger seat does not operate the switch that signals someone is on the back Official BRP

Machines affected: Coast to Coast accessory passenger seat built between 18 November 2015 and 4 April 2016, for Spyder F3 from 2015 and 2016

The risk: The stability control is not adjusted for the passenger's weight and control of the machine can be lost.

What the dealer does: The dealer modifies the seat to put it right. It is free of charge. Transport Canada also asks owners to stop using the seat and take it to the dealer.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 16E061000 2016353 · Date: 11 July 2016 · Part: accessory passenger seat and passenger presence switch

The dipped beam headlight aims too high and dazzles oncoming traffic Official BRP

Machines affected: Spyder RT from 2017

The risk: Dazzling oncoming drivers increases the risk of an accident.

What the dealer does: The dealer changes the faulty headlights. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 17V318000 2017253 · Date: 12 May 2017 · Part: headlight

The wheel nuts can crack and the wheel works loose Official BRP

Machines affected: Ryker from 2019 and 2020

The risk: A loose wheel can cause loss of control of the machine and increases the risk of an accident.

What the dealer does: The dealer changes the wheel nuts. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 19V683000 · Date: 27 September 2019 · Part: wheel nuts

The brake mechanism bracket can break under emergency braking Official BRP

Machines affected: Spyder RT from 2020

The risk: Braking ability is lost completely. That increases the risk of an accident.

What the dealer does: The dealer fits a reinforcement bracket. It is free of charge. The BRP bulletin for this campaign is 2020-5.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 20V186000 · Date: 27 March 2020 · Part: brake mechanism bracket

Badly fitted front wheels can come off the machine Official BRP

Machines affected: Ryker from 2020

The risk: If a front wheel comes off, control of the machine is lost. Transport Canada warns that a loose wheel can strike another person or another vehicle.

What the dealer does: The dealer checks the torque on the front wheel and refits the red safety clip.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 20V632000 2020489 · Date: 14 October 2020 · Part: front wheels, nuts and red safety clip

The front sprocket wears out early and the machine can lose drive Official BRP

Machines affected: Spyder F3 and Spyder RT from 2015 to 2019

The risk: Losing drive while riding increases the risk of an accident.

What the dealer does: The dealer first carries out a temporary repair and changes the front sprocket when parts are available. It is free of charge.

Source: The NHTSA recall database and the official BRP safety campaign pageSee the official notice

Campaign: 22V352000 · Date: 18 May 2022 · Part: front belt sprocket

The handlebar riser bolt can break and the machine is left with no steering Official BRP

Machines affected: Ryker from 2022

The risk: If the bolt breaks, steering control is lost all at once. BRP asks owners not to ride the machine until it has been put right.

What the dealer does: The dealer cleans the thread in the steering column and fits a new riser bolt. It is free of charge. The BRP number for this campaign is 2022-16.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 22V503000 2022375 · Date: 13 July 2022 · Part: handlebar riser bolt

The mudguard light wiring works loose, rubs on the wheel and the engine stalls Official BRP

Machines affected: Ryker from 2019 to 2023

The risk: A short circuit stalls the engine while riding and that increases the risk of an accident.

What the dealer does: The dealer secures both wiring looms. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 22V799000 2022605 · Date: 22 October 2022 · Part: wiring for the position light and the front indicators

The mirror glass comes unstuck from the housing and falls off Official BRP

Machines affected: Spyder F3 and Spyder F3-S from 2022

The risk: Without the mirror glass it is much harder to see what is coming from behind and the risk of an accident increases.

What the dealer does: The dealer fits complete new mirrors. It is free of charge.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 23V053000 2023044 · Date: 5 February 2023 · Part: mirror

The brake lights stay on even when you are not braking Official BRP

Machines affected: Spyder RT from 2020 to 2023 and Ryker from 2022 and 2023

The risk: If the brake light is on all the time, other road users do not know when the rider is actually going to brake. That increases the risk of an accident.

What the dealer does: Depending on the model, the dealer changes the brake light switch, adjusts it or adds a spring to it. It is free of charge. The BRP number for this campaign is 2023-6.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 23V175000 2023137 · Date: 17 March 2023 · Part: brake light switch

The fuel pump can fail and the engine stalls while riding Official BRP

Machines affected: Ryker from 2019 to 2023 according to the NHTSA. BRP and Transport Canada extend the notice up to 2024 and include the pumps sold as dealer spare parts

The risk: If the pump fails the engine stalls while riding and may not start again. That increases the risk of an accident.

What the dealer does: The dealer inspects the fuel pump and changes it if needed. It is free of charge. The BRP bulletin for this campaign is 2023-10.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 23V855000 2023674 · Date: 15 December 2023 · Part: high pressure fuel pump

The mirror glass comes loose: extension of the previous year's campaign Official BRP

Machines affected: Spyder F3 and Spyder F3-S from 2023

The risk: Without the mirror glass it is much harder to see what is coming from behind and the risk of an accident increases.

What the dealer does: The dealer fits complete new mirrors. It is free of charge. The BRP bulletin for this campaign is 2023-9 and it replaces campaign 23V053000 on the 2023 machines.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 23V856000 2023675 · Date: 17 December 2023 · Part: mirror

The engine output shaft can break through fatigue and the machine loses drive Official BRP

Machines affected: Spyder F3 and Spyder RT from 2017 to 2019

The risk: Losing drive while riding increases the risk of an accident.

What the dealer does: The dealer changes the output shaft according to the mileage on the machine. The letters to owners went out on 5 February 2025.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 24V728000 2024574 · Date: 1 October 2024 · Part: engine output shaft

The belt tensioner roller bracket fails and the belt can break Official BRP

Machines affected: Canyon from 2025

The risk: If the belt breaks the machine loses drive and that increases the risk of an accident.

What the dealer does: The dealer fits a new bracket for the lower belt tensioner roller. It is free of charge. The BRP bulletin for this campaign is 2025-4.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 25V448000 2025362 · Date: 3 July 2025 · Part: bracket for the lower belt tensioner roller

The instrument cluster display restarts, freezes or goes black Official BRP

Machines affected: Spyder RT and Spyder F3 from 2024 to 2027 and Canyon from 2025 to 2027 with the touchscreen cluster. The same campaign also covers the Origin and Pulse, which are two wheelers

The risk: If the cluster does not work the rider cannot see important information such as the speed or the warning lights. That increases the risk of an accident.

What the dealer does: The cluster software is updated over the air or at the dealer. It is free of charge. The BRP numbers for this campaign are 2027-2 and 2026-3.

Source: The NHTSA recall database and the official BRP and Transport Canada safety campaign pagesSee the official notice

Campaign: 26V575000 2026426 · Date: 7 September 2026 · Part: touchscreen instrument cluster, software

Back to the Workshop